PCjs Machines

 ------------------------------------------------------------------------------
         README.TXT: LETTERHEAD.PRO FOR WORDPERFECT 5.0 or 5.1 (DOS)
 ------------------------------------------------------------------------------

 Thank you for your interest in Letterhead Pro. This program requires only that
 you have WordPerfect 5.0 or 5.1 (DOS) installed. Letterhead Pro will set up 16
 graphic sample letterheads, 6 logos, and 1 watermark into WordPerfect. Each
 letterhead will also have a macro that installs the letterhead into any
 WordPerfect document.  After the installation is completed, WordPerfect will
 automatically be called up with a document entitled README.DOC on screen.
 (It does not contain the same information as this file.) README.DOC contains
 instructions on how to use the installed macros, as well as instructions for
 designing and ordering your own customized letterhead, logo, and watermark.

 README.DOC is a WordPerfect document and must be printed from inside
 WordPerfect. You may use README.DOC to guide you through the display and
 printing of the letterheads. The document was set up using COURIER 10cpi so
 that it would print the order form and other items correctly on almost any
 printer. You will be shown how you may obtain your own customized graphic
 letterheads. All instructions, worksheets, and order forms are included.

 You may design your own letterhead, convert your present printed letterhead,
 or have CPI Software design a letterhead for you. CPI Software will place
 this design into a graphic PCX format, add a macro, and return it to you.

 If the printer you are currently using will print WordPerfect graphics, it
 will print graphical PCX letterheads. This includes lasers, ink jets, and
 dot-matrix printers. You do NOT need special printer drivers or any other
 add-ons to place a customized professionally created letterhead on your
 WordPerfect documents. WordPerfect and Letterhead Pro are all you need.

 Before starting the installation, refresh yourself on whether you used the
 Basic or Custom installation when installing WordPerfect. If you do not
 remember, then locate the path to the macro files, graphic files, and
 WordPerfect document files. Use the Custom installation for Letterhead Pro
 and type in the path data when prompted.


                                 INSTALLATION

 Letterhead Pro may be installed in one of three ways. It may also be removed
 from your hard disk (uninstalled) using the CLEANUP command below.

 1. Basic Installation:

 This installation corresponds to the WordPerfect Basic installation, where
 all the documents, macros, and graphics were into the \WP51 directory. If you
 did not make any changes in the directory locations since installing
 WordPerfect with the Basic installation, then this is the method of choice.

 2. Custom Installation:

 This installation will let you place the document files, the macros, and the
 graphics into any directory you wish. You must know the path to each of these
 directories. For example, if you placed all documents into a directory named
 "DOC" off the main "WP51" directory on drive "C", then this would be the full
 path:

                               C:\WP51\DOC

 You will be asked: a. the drive letter, b. the path for document files, c. the
 path for macro files (files ending with .WPM), and c. the path for graphic
 files (files ending with .WPG). If you are not sure how you had installed
 WordPerfect, then use this method. Locate these files before the installation,
 and write down their proper path. Even if you used the Basic WordPerfect
 installation, this method would work, if you know where the files are located.

 3. Manual Installation:

 This method does not use the Letterhead Pro INSTALL program, but it must be
 done exactly as follows:

 a. Locate where the WordPerfect document files, macro files, and  graphic
    files are on your hard disk.

 b. From the INSTALL disk, copy these files into the proper directory:

           1. PRO.EXE and ZAP.EXE into the documents directory.
           2. MACROS.EXE and ZAP.EXE into the macros directory.
           3. GRAPHICS.EXE and ZAP.EXE into the graphics directory.

 c. PRO.EXE, MACROS.EXE, GRAPHICS.EXE, and ZAP.EXE are self-extracting
    files. You need only to type their names and strike the ENTER key, and
    the Letterhead Pro file(s) will be extracted from them.

 d. ZAP.EXE should be in every directory where any Letterhead Pro files are
    located. This contains the file CLEANUP.EXE that is used to remove all
    Letterhead Pro files from the directory (see below) at a later time.

 e. After extracting all files, call up WordPerfect. When WordPerfect is on
    screen, retrieve or open the README.DOC file. Print the README.DOC file
    just as you would print any WordPerfect document. Use the README.DOC
    instructions to guide you through the printing of the letterheads. Then
    use the Worksheet and Order Form to obtain your customized letterheads,
    logos, and watermark.


                         UNINSTALLING LETTERHEAD PRO

 The installation places the file CLEANUP.EXE into every directory where
 Letterhead Pro files have been placed. When you wish to remove all installed
 Letterhead Pro files, simply go into the directories where you have installed
 files and type:

                       CLEANUP   and strike the ENTER key

 You will be asked if you want to uninstall all Letterhead Pro files in that
 directory. Press the ENTER key and all installed files will be removed,
 including CLEANUP.EXE.


 CPI Software also distributes Letterhead Pro for WordPerfect for Windows,
 Letterhead Pro for Word for Windows, and Letterhead Pro for Ami Pro. In
 addition, Laser Letterhead plus and The Laser Letterhead Kit are available
 specifically for laser printers. We have been designing letterheads for
 business and personal use since 1987.

 Thank you again, and enjoy your experience with Laser Letterhead Pro.

 CPI Software, Post Office Box 47097, Saint Petersburg, Florida 33743-7097 USA
            Technical Assistance Voice/Message/Fax 813-544-0212

                                Member of the
                          Association of Shareware
                          Authors and Distributors

  Letterhead Pro for WordPerfect (DOS) has been produced by a member of
  the Association of Shareware Authors and Distributors, and as such, has met
  their demands for professional programming. Any problems of a shareware
  nature that cannot be resolved by CPI Software, may be brought to the
  attention of the ASAD Ombudsman for possible correction. Please send all
  information, including the name and address of the person or company you
  received Letterhead Pro for WordPerfect from, to: ASAD, ATTN: Ombudsman,
  2425 North Limestone Street, Springfield, Ohio 45503-1109.

 Volume in drive A has no label
 Directory of A:\

README   TXT      7058   2-19-93   8:21p
BROWSE   COM      1088   2-01-93  12:00p
GRAPHICS EXE    206524   2-12-93  12:25a
INSTALL  EXE      7845   2-20-93  12:08p
MACROS   EXE     17590   2-06-93  11:23p
PRO      EXE     25281   2-13-93   7:58p
ZAP      EXE     16113   2-19-93   9:20p
GO       BAT        36   6-22-93  10:36a
SHOW     EXE      2040   9-12-88  10:48a
        9 file(s)     283575 bytes
                       34816 bytes free