Home of the original IBM PC emulator for browsers.
[PCjs Machine "ibm5150"]
Waiting for machine "ibm5150" to load....
Disk No: 2967
Disk Title: Fonts Galore #7
PC-SIG Version: S1.0
Program Title: Fonts Galore #7
Special Requirements: Windows 3.0 and Adobe Type Manger.
A collection of ten diskettes full of fonts to be used with Windows and
Adobe-type Manager installed. They can be used by Postcript and LaserJet
printers. Fonts included with this disk are: RSOswaldGrey, RSPhoenix,
RSPixie, RSPlaybill, RSPoloScript, RSRichard Murray, RSRiverside,
RSRudelsberg.
PC-SIG
1030D East Duane Avenue
Sunnyvale Ca. 94086
(408) 730-9291
(c) Copyright 1992 PC-SIG, Inc.
╔═════════════════════════════════════════════════════════════════════════╗
║ <<<< PC-SIG Disk #2967 Fonts Galore #7 >>>> ║
╠═════════════════════════════════════════════════════════════════════════╣
║ ║
║ Note: You must have Adobe Type Manager installed in Windows 3.0 in ║
║ order to use these fonts. ║
║ ║
║ To install the fonts: ║
║ ║
║ From the Main program group in Windows 3.0, open the ATM control panel ║
║ and click on "Add". Next, click on any subdirectory, or press Enter. ║
║ From there, choose the drive that has fonts. Once that's completed, ║
║ choose the fonts to be installed and click on "Add". You can install ║
║ all the fonts on the disk by clicking on the first font and dragging ║
║ the highlight bar to the bottom of the list. Once the fonts have been ║
║ installed, click on Exit. You will be required to restart Windows so ║
║ the fonts can be accessed by your applications. ║
║ ║
║ ║
║ (c) Copyright 1992, PC-SIG Inc. ║
╚═════════════════════════════════════════════════════════════════════════╝
Francis X. "Butch" Mahoney, Jr.
302 Lessard St.
Donaldsonville, La. 70346
(504) 473-9378
The fee for this typeface is $15 as is, check or money order(preferred).
Or send $20 and a disk and a list of the sizes of the bitmaps you would like to have and I will try to oblige (within reason...like, don't ask for 127 point,etc...). Also, I can include (and probably will anyway) varying spaces to help you set your own type. I like very close spacing, but if you like to spread out your type, then this will be available from within the font itself. This capability will be for those people who don't have all the fancy new software that will do manual kerning, etc. (available only to registered owners). [proposed spacing - units based on selected point size - 1,1/2,1/4,1/8,1/16,1/32,1/64 and maybe smaller]
Hello Font Lover,
Previously, I had become very discouraged by distributing my work on CompuServe. A couple of bad experiences made it difficult for me to
continue. However, recently I have received some recognition (Thank you Richard Eckhardt), and it has made me rethink my position.
The economy is bad in Louisiana and I am not doing well. You may have noticed the address change. I cannot afford the time on CompuServe except for uploading. Also, my troubles are your gain for neither can I afford to do any other kind of marketing for my work other than ShareWare (they would cost at least twice as much or more). And just having me "sit on these faces" (pun intended) is not doing any good for myself or anyone else.
My first uploads to CompuServe were rather primitive attempts. I think
now you will find that I am capable of good - excellent quality alter-
natives to the "higher priced spreads".
I will assume you know what to do with this typeface.
(use Font/DA Mover 3.2 or higher, don't let Font/DA Mover change the
font id, etc...)
.........if you don't know how to work these, call!!! (not collect)
.........if you can't call, write (like I said, I can't afford CIS)
There is only one size bitmap with this typeface (I'm trying to keep my long distance and your download charges to a minimum). And there is a good chance
that it is not very clean (some of them are however, and even print fairly well on ImageWriter - besides, LaserWriter doesn't care what the bitmaps look like - you can use geneva first, then switch to this face before printing). It will however, automatically download to any PostScript Device i.e. LaserWriter, Linotronic, or any of the new PostScript printers that are accessed by AppleTalk. (Versions of this typeface can be prepared for manual downloading as a text only file for non-Macintosh computers if the need should arise.)
If you should happen to investigate any of the other typefaces I've uploaded
you will probably discover that this is a form letter tacked on to every one
of them. You can skip reading the others, however, the ShareWare fee remains.
PLEASE PAY ME...
Thank you.
P.S. If you are curious as to what happened to Calligraphic, I had to shelve it. It doesn't work with the newer LaserWriter software. The new Fontographer software was supposed to fix the problems. The recompiled Calligraphic worked with the new LW software but the decorative letters don't print properly (they turn out with black letters on the background, and they are supposed to be white - I haven't been able to fix it - maybe with the next release of Fontographer). Furthermore, it would only work if ZapfChancery was available, which leaves out regular LW users.
Volume in drive A has no label
Directory of A:\
RSOSWGRE DOC 1844 6-22-90 11:27p
RSOSWGRE PFB 29496 1-15-91 12:17a
RSOSWGRE PFM 684 1-15-91 12:17a
RSPHOENI DOC 2157 6-26-90 9:18p
RSPHOENI PFB 26050 1-25-91 1:34p
RSPHOENI PFM 678 1-25-91 1:34p
RSPIXIE DOC 1731 10-11-90 7:23p
RSPIXIE PFB 20118 1-25-91 1:36p
RSPIXIE PFM 674 1-25-91 1:36p
RSPLAYBI DOC 37888 1-26-91 2:43p
RSPLAYBI PFB 25006 1-25-91 1:39p
RSPLAYBI PFM 680 1-25-91 1:39p
RSPOLSEM DOC 1582 10-11-90 7:15p
RSPOLSEM PFB 19502 1-11-91 11:00p
RSPOLSEM PFM 692 1-11-91 11:00p
RSRICMUR DOC 3662 1-24-89 9:51a
RSRICMUR PFB 17810 1-25-91 1:51p
RSRICMUR PFM 690 1-25-91 1:51p
RSRIVER DOC 3072 9-22-90 7:51p
RSRIVER PFB 13819 1-25-91 1:53p
RSRIVER PFM 682 1-25-91 1:53p
RSRUDELS DOC 1603 10-17-90 11:12p
RSRUDELS PFB 20030 1-25-91 1:59p
RSRUDELS PFM 684 1-25-91 1:59p
GO TXT 1617 4-08-92 3:32p
FILE2967 TXT 566 3-30-92 1:26p
GO BAT 38 1-01-80 1:37a
27 file(s) 233055 bytes
77824 bytes free