PCjs Machines

╔═════════════════════════════════════════════════════════════════════════╗
║          <<<<  PC-SIG Disk #2907  POWER BBS FOR WINDOWS  >>>>           ║
║                        Disk 1 of 2 (also #2908)                         ║
╠═════════════════════════════════════════════════════════════════════════╣
║ To unzip the files from the two zipped files contained on the two       ║
║ diskettes, copy PKUNZIP.EXE on Disk 2 to a temporary subdirectory on    ║
║ on your hard drive. Then from that subdirectory, unzip the files to the ║
║ subdirectory by typing:                                                 ║
║                                                                         ║
║       PKUNZIP [floppy drive with PBBS diskette]:PBBS188A  <enter>       ║
║                                                                         ║
║ Insert Disk 2 and do the same thing, this time with PBBS188B.           ║
║                                                                         ║
║ After decompressing the files, print the installation instructions by   ║
║ typing:  COPY SHARWARE.DOC PRN  <enter>                                 ║
║                                                                         ║
║                                        (c) Copyright 1992, PC-SIG Inc.  ║
╚═════════════════════════════════════════════════════════════════════════╝

Enclosed is an example PROTOCOL.BBS file, which will run HSLINK
for you.  Replace this new protocol.bbs with your old protocol.bbs
in your \powrbbs\config directory.

The protocol.bbs assumes you have hslink.exe, located in your
C:\Powrbbs directory.

To operate Hslink, your users should select the Download command.  They
will then be able to select the files for download.  Hslink will then
permit your users to upload files.  PowerBBS will check for files when
the transfer is complete.

A new |MACRO| - |UPDIR| contains the transfer directory.  This directory
is normally your c:\powrbbs\trans directory, which is a temporary directory
PowerBBS uses.

** In order to use the above MACROS and HSLINK, be sure your powrbbs.exe
   file is dated June 9, 1992, or later.

────────────────────────────────────────────────────────────────────────────
────────────────────────────────────────────────────────────────────────────
──────────────────── ▓▓▓▓▓▓▓ ───────────────────────────────────────────────
──────────────────── ██   ██ ───────────────────────────────────────────────
──────────────────── ▓▓▓▓▓▓▓  ▓▓▓  ▓ ▓ ▓  ▓▓▓  ▓▓▓▓ ────────────────────────
──────────────────── ██       █ █  █ █ █  █▄   █  █ ────────────────────────
──────────────────── ▓▓       █ █  █ █ █  █▀   █▀█  ────────────────────────
──────────────────── ██       ▓▓▓  ▓▓▓▓▓  ▓▓▓  ▓  ▓  BBS ───────────────────
────────────────────────────────────────────────────────────────────────────
────────────────────────────────────────────────────────────────────────────

                ****************************************
                         POWERbbs Order Form

PowerBBS for WINDOWS (Windows Version):  This version of PowerBBS,
 includes WINDOWS Protocols, and all the advanced features
 that PowerBBS has to offer as a BBS.  This bbs is
 good, if you are looking to run your BBS on one computer
 (without SHARE LOADED, as it is not needed). SHARING is not
 supported in this version, but as long as you are running on one computer
 (and do not have SHARE loaded) it should not be needed.
 Normal Price is $95 per copy.

PowerBBS for WINDOWS (Windows Professional (Commercial) Version):
 This version of PowerBBS, includes all the features of the Windows
 Version. In addition, SHARING support is included for NETWORK
 support. As long as you have WINDOWS working and configured for your
 NETWORK, PowerBBS will use WINDOWS internal SHARING skemes
 to make the information available to all your nodes.
 You are licensed to use PowerBBS at one location (building or
 a home), with this version.  This is also a license to use PowerBBS
 for Commerical use.
 -------------------------------------------------------------------
  The Professional Version includes built in capabilities to permit
  your user to download and upload mail, using the QuickMail
  standard.
 -------------------------------------------------------------------
 Normal Price is $180 per copy.

PowerBBS (DOS Professional Version)
 This version of PowerBBS is our DOS Version.  It comes with a FOSSIL driver
 that will permit you to run up to 25 lines on one computer using a
 multitasker (compatable with Desqview).  You lose out on the WINDOWS
 capabilities, but PowerBBS for DOS runs much quicker (and also on XTs).
 Using the INT 14 FOSSIL, you can easily set up and operate a multiline
 bbs using Desqview (tm) and your favorite multiport card.
 Normal Price is $95 per copy.

**********************************************************************
* CREDIT CARDS are now accepted for purchase of PowerBBS.  To charge *
* PowerBBS to your MC/VISA, call up the PowerBBS Support Line at     *
* 516-822-7396 (USR DUAL), 516-822-7568 (2400).  You will be able to *
* charge your purchase online.                                       *
**********************************************************************

  If you are ordering through the mail,
  payment should be made by check. (Payable to Russell Frey)

  (You may order with your credit card only online via the support bbs)

  Remit to: Russell Frey
            35 Fox Ct.
            Hicksville, NY 11801

                                                      Price       Total
              Program/Description         # Copies    Per Copy    Cost

PowerBBS for WINDOWS Bulletin Board System
(Windows Version)                          _________   $95.00   _____________


PowerBBS for WINDOWS Bulletin Board System
(Windows Professional Version)             _________  $180.00   _____________


PowerBBS for DOS (Professional Version)    _________   $95.00   _____________


 Name     ___________________________________________________________________

 Full Name to be used as SysOp ______________________________________________

 BBS #    (______) _______________________

 Home #   (______) _______________________

 Address  ___________________________________________________________________

          ___________________________________________________________________

          ___________________________________________________________________

          ___________________________________________________________________

Have you ever run a BBS before?        Yes        No


If yes, what BBS Software did you use?   ____________________________________


Where did you learn about PowerBBS?  ________________________________________


Do you want a 5.25" disk                      Yes        No

               -------------------------------------------
                 XXXXXXXX
                 X      X
                 X      X  xxxxxxx  x  x  x  xxx  xxxxxx
                 XXXXXXXX  x     x  x  x  x  x    x    x
                 X         x     x  x  x  x  xx   xxxxxx
                 X         x     x  x  x  x  x    x  x
                 X         xxxxxxx  xxxxxxx  xxx  x   x
               -------------------------------------------
                           Bulletin Board System
               -------------------------------------------
                 a FULLY capable TRUE SHAREWARE version
               -------------------------------------------
                            For DOS and WINDOWS!
               -------------------------------------------
                               Version 1.85
               -------------------------------------------
                 (c) Copyright 1989-1992 Russell E. Frey
                          All Rights Reserved
               -------------------------------------------
                            Support BBS Lines

                      (516) 822-7396   (v32/v32bis)
                      (516) 822-7568   (2400)
               -------------------------------------------
                 Help distribute this shareware package,
                 give it to your friends, and upload it
                 to your favorite BBSs!
               -------------------------------------------

----------------------------------------------------------------------------
Notes on the SHAREWARE version:

PowerBBS for SHAREWARE, is a true shareware version.  Everything is included
in this version, including Zmodem.  The only difference between the shareware
version and the registered version, is the message that specifies UNREGISTERED
in PowerBBS (Shareware), will not be displayed in the REGISTERED version.

Also, be aware that Registered users will receive a PRINTED MANUAL, with a
TABLE of CONTENTS (not available in the .WRI format MANUAL).

----------------------------------------------------------------------------
To install WINDOWS version (Here is a BRIEF explanation.  PLEASE read the
                            MANUAL on installation.):

 1) Copy Powrmain.exe and Powrfile.exe onto a floppy.  Put the floppy into
    disk A or B.
 2) run Install.exe.  This is a WINDOWS application, and must be run
    from WINDOWS.
 3) READ The DOCS on installation.

--> PROTOCOL INFORMATION:
PowerBBS provides TWO protocol programs (both named PBBSPROT.EXE).

The one provided in powrmain.exe, and which will be installed is the
WINDOWS API pbbsprot.  This version, uses the WINDOWS API to communication.
This is the highly recommended selection.  DO NOT CHANGE THIS, unless you
are exactly sure of what you are doing.

The one available in protintr.exe is the PBBSPROT.EXE that does it's
communications internally!   It does not use the Windows API!  Just simply
unextract the PBBSPROT.EXE in Protintr.exe, and place it in your \Powrbbs
directory.  Before doing this, be sure you know what you are doing, and have
the PBBSPROT.EXE already in your \powrbbs directory, saved.
----------------------------------------------------------------------------
To install DOS version:

 1) Copy Powrmain.exe and Powrfile.exe onto a floppy.  Put the floppy into
    disk A or B.  Also copy WINANSI.exe, if you want to install WINANSI (an
    ANSI editor for WINDOWS).
 2) Run POWRDOS.EXE this file will extract the DOS specific files.
 3) run Installd.exe.
 4) Copy the DOS specific files (such as powrbbs.exe), that were extracted,
    to your \Powrbbs directory.
 5) READ The DOS specific documentation, that was extracted from POWRDOS.EXE
----------------------------------------------------------------------------

** UPDATE.DOC contains update information!

** PowerBBS for Windows requires a 286 or higher processor to run.
   PowerBBS for DOS requires an XT or higher processor to run.

----------------------------------------------------------------------------

For the latest ORDERING INFORMATION, call the SUPPORT line at (516) 822-7396

----------------------------------------------------------------------------
Included files:

Disk 1   (pbbs##-a.zip)

  POWRMAIN.EXE, POWRFILE.EXE => Required files for INSTALL.EXE
  INSTALL.EXE   ==> Installs PowerBBS, a WINDOWS application
  ORDER.TXT     ==> Registration Form, ORDER PowerBBS Today!

Disk 2   (pbbs##-b.zip)
  ORDER.TXT     ==> Registration Form, ORDER PowerBBS Today!
  PBBSDOC.WRI   ==> PowerBBS Documentation in WINDOWS WRITE FORMAT.
  UPDATE.DOC    ==> Latest UPDATES to POWRDOC.WRI
  POWRDOS.EXE   ==> PowerBBS for DOS, executables and information
  PROTINTR.EXE  ==> The PBBSPROT.EXE, that bypasses WINDOWS API to talk
                    to the modem.  It is highly recommended that you do
                    not touch this file, unless you know what you are doing.
  FIDOINFO.EXE  ==> Run this file, and the FIDO Docs to interface
                    PowerBBS with FIDO, will be extacted.

 Volume in drive A has no label
 Directory of A:\

PBBS188A ZIP    352478   6-19-92   8:12p
GO       TXT      1386  11-03-92  12:19p
GO       BAT        38   1-31-91  12:58a
        3 file(s)     353902 bytes
                        6144 bytes free