PCjs Machines
Home of the original IBM PC emulator for browsers.
PC-SIG Diskette Library (Disk #2481)
[PCjs Machine "ibm5170"]
Waiting for machine "ibm5170" to load....
Information about “PRINTGL & SOFT87”
PRINTGL prints an HP-GL (Hewlett-Packard Graphics Language - HP 7475
subset) plotfile on a matrix printer. HP-GL is widely supported by
graphics programs including AutoCAD, Generic CADD, MathCAD, SAS,
MICROCADAM, Schema, and many more. PRINTGL has native mode drivers for
Epson and NEC compatible 9 and 24 pin dot matrix printers, HP Laserjet,
Deskjet, and PaintJet, and IBM 9 and 24 pin Proprinters, Quietwriter 2
and 3, and LaserPrinter. It will also display plots with a CGA, EGA,
VGA, enhanced VGA, or HGC and output a bit map or GEM .IMG file.
Even if your graphics program supports your printer, you may find that
PRINTGL gives better print quality. PRINTGL uses the best graphics
modes available for each printer that it supports. If you need printed
graphics output from personal software, you can output HP-GL and use
PRINTGL to do the printing. This gives immediate support to a wide range
of printers.
PRINTGL Menu Interface (PMI), included with PRINTGL, gives you easy
access to PRINTGL's many options, and lets you select a list of
plotfiles to print.
SOFT87 is a memory resident math coprocessor emulator that emulates
floating point calculations(80287, 802387) on your 286, or 386
computers. It is one of the cheapest ways to acquire math coprocessing
capabilities.
SOFT87 is designed for those who do not have an 80x87 (8087,
80287,80387) installed on their computers, but want to use programs
that require an 80x87, or write programs with 80x87 instructions.
This program will work with MS-DOS, PC-DOS, MS Windows or DESQview
SOFT87 is a Once loaded into memory, SOFT87 stays there until you turn
off the computer. After loading SOFT87, the 80x87 instructions can be
executed directly even without an 80287 or 80387 installed in the
computer. Then you can run programs that require an 80287 or 80387, such
as AutoCAD R9, AutoCAD R10, PSpice, PC-MATLAB, ASYST, Auto sketch and
PC-SIMNON.
The registered version of SOFT87 provides 57 extended instructions that
cannot be found in other coprocessors. These extended instructions will
simplify program design and shorten programming time.
With typical co-processors costs between $200(80287-10) to
$500(80387-33), you can't afford not to try SOFT87, since it will save
you money even after you register it.
FILE2481.TXT
Disk No: 2481
Disk Title: PrintGL & Soft87
PC-SIG Version: S1
Program Title: PrintGL
Author Version: 1.12C
Author Registration: $25.00
Special Requirements: None.
PRINTGL prints an HP-GL (Hewlett-Packard Graphics Language - HP 7475
subset) plotfile on a matrix printer. HP-GL is widely supported by
graphics programs including AutoCAD, Generic CADD, MathCAD, SAS,
MICROCADAM, Schema, and many more. PRINTGL has native mode drivers for
Epson and NEC compatible 9 and 24 pin dot matrix printers, HP Laserjet,
Deskjet, and PaintJet, and IBM 9 and 24 pin Proprinters, Quietwriter 2
and 3, and LaserPrinter. It will also display plots with a CGA, EGA,
VGA, enhanced VGA, or HGC and output a bit map or GEM .IMG file.
Even if your graphics program supports your printer, you may find that
PRINTGL gives better print quality. PRINTGL uses the best graphics
modes available for each printer that it supports. If you need printed
graphics output from personal software, you can output HP-GL and use
PRINTGL to do the printing. This gives immediate support to a wide range
of printers.
PRINTGL Menu Interface (PMI), included with PRINTGL, gives you easy
access to PRINTGL's many options, and lets you select a list of
plotfiles to print.
Program Title: Soft87
Author Registration: $39.00 for 287 - $69 for 287/387 - $49 for develope
Special Requirements: 286, 386, or 386SX.
SOFT87 is a memory resident math coprocessor emulator that emulates
floating point calculations(80287, 802387) on your 286, or 386
computers. It is one of the cheapest ways to acquire math coprocessing
capabilities.
SOFT87 is designed for those who do not have an 80x87 (8087,
80287,80387) installed on their computers, but want to use programs
that require an 80x87, or write programs with 80x87 instructions.
This program will work with MS-DOS, PC-DOS, MS Windows or DESQview
SOFT87 is a Once loaded into memory, SOFT87 stays there until you turn
off the computer. After loading SOFT87, the 80x87 instructions can be
executed directly even without an 80287 or 80387 installed in the
computer. Then you can run programs that require an 80287 or 80387, such
as AutoCAD R9, AutoCAD R10, PSpice, PC-MATLAB, ASYST, Auto sketch and
PC-SIMNON.
The registered version of SOFT87 provides 57 extended instructions that
cannot be found in other coprocessors. These extended instructions will
simplify program design and shorten programming time.
With typical co-processors costs between $200(80287-10) to
$500(80387-33), you can't afford not to try SOFT87, since it will save
you money even after you register it.
PC-SIG
1030D East Duane Avenue
Sunnyvale Ca. 94086
(408) 730-9291
(c) Copyright 1989 PC-SIG, Inc.
GO.TXT
╔═════════════════════════════════════════════════════════════════════════╗
║ <<<< PC-SIG Disk #2481 PRINTGL & SOFT87 >>>> ║
╠═════════════════════════════════════════════════════════════════════════╣
║ PRINTGL = ║
║ To access PRINTGL from the A: root directory, type: ║
║ CD PRINTGL (press Enter) ║
║ DIR (press Enter) ║
║ ║
║ To read installation instructions, type: README (press Enter) ║
║ ║
║ To print PRINTGL's documentation, type: COPY PRINTGL.DOC PRN (Enter) ║
║ ║
║=========================================================================║
║ To return to the A: root directory, type: CD / (press Enter) ║
║=========================================================================║
║ ║
║ SOFT87 = ║
║ To access SOFT87 from the A: root directory, type: ║
║ CD SOFT87 (press Enter) ║
║ DIR (press Enter) ║
║ ║
║ To print the SOFT87 documentation, type: COPY SOFT87.DOC PRN (Enter) ║
║ ║
║ ║
║ Copyright 1990, PC-SIG, Inc. ║
╚═════════════════════════════════════════════════════════════════════════╝
Directory of PC-SIG Library Disk #2481
Volume in drive A has no label
Directory of A:\
GO BAT 40 1-01-80 6:00a
GO TXT 2003 11-19-90 7:00a
FILE2481 TXT 4959 11-01-90 5:07p
SOFT87 <DIR>
PRINTGL <DIR>
5 file(s) 7002 bytes
Directory of A:\SOFT87
. <DIR>
.. <DIR>
SOFT87 COM 14562 5-05-90
SOFT87 DOC 4853 10-05-90 2:26p
4 file(s) 19415 bytes
Directory of A:\PRINTGL
. <DIR>
.. <DIR>
README BAT 85 9-01-90 1:12a
README 1 1185 9-01-90 1:12a
README 2 1024 9-01-90 1:12a
README 3 1122 9-01-90 1:12a
PRINTGL EXE 65216 10-19-90 1:12a
PMI EXE 34688 9-01-90 1:12a
PRINTGL DOC 85448 9-01-90 1:12a
CHARSET PLT 7609 9-01-90 1:12a
SAMPLE PLT 1525 9-01-90 1:12a
11 file(s) 197902 bytes
Total files listed:
20 file(s) 224319 bytes
89088 bytes free