Home of the original IBM PC emulator for browsers.
[PCjs Machine "ibm5170"]
Waiting for machine "ibm5170" to load....
What is more fun than collecting and trading baseball cards;
permits you to rub elbows with owners, starters and free agents;
provides you the opportunity to compete against other players; and,
doesn't stick to most dental work? It's Fantasy Leagues!
FANTASY LEAGUES are springing up across the country, covering baseball,
football, basketball -- all major league sports. Developing your
fantasy team from the real players in the major leagues, you earn points
depending on how a real player performs during a season. But how do you
put your team together?
FANTASY SPORT DRAFTER provides you with a computerized opponent in the
team draft arena. You can go up against it as many times as you wish,
learning the ins and outs of actual fantasy drafting. When you're
finished, you'll have assembled your own team from the best of the
major leagues in that sport. You'll hardly be able to wait for the
start of the season.
After you have developed your team, FANTASY SPORT DRAFTER allows you
to submit your picks to a fantasy sports center to compete in an actual
drafting contest. Your team may win the title of Fantasy Team Champion.
COUCH COACH FANTASY DRAFT
USER'S MANUAL
Prepared by:
Len Shepard & Allan Schwab
November 24, 1989
Table of Contents Page
Introduction..................................... 2
Compatibility.................................. 2
Contents......................................... 2
Ways to play Couch Coach Fantasy Draft........... 3
Installation..................................... 3
Operation of the Software........................ 4
How to enter, make selections, and exit........ 4
How to move around inside the system........... 4
Entering a Setup file............................ 5
Changing Player Data............................. 6
Drafting Fantasy Teams........................... 7
Choice of Leagues.............................. 7
Naming Each Draft.............................. 7
Draft order.................................... 7
The Drafting Screen............................ 7
The Drafting Process........................... 7
Adding Free Agents............................. 8
Review Options................................. 8
Second Thoughts................................ 8
Potato League Sports picks and logic........... 8
HELP! Help screen available while drafting..... 9
Preparing a Diskette for Submission.............. 10
Generate Reports................................. 10-11
System Utilities................................. 11
List File Directory............................ 11
Examine Contents of a file (preview report).... 11
Change Control File Name....................... 11
Box Outline Color Modification................. 11
Appendix A - Errors and Corrective Action........ 12
NOTE: Not all instructions contained in this documentation are
applicable to the SHAREWARE version of Fantasy Drafter. Some
items relate only to the enhanced version of FD, which is
available for $19.95 (plus $2.50 S&H) from Potato League Sports.
If you have the shareware version, and would like to order the
enhanced version, please call Potato League Sports at (800) 537-
9228. The primary difference between the shareware version and
the enhanced version is in the Drafting abilities of the
software. The shareware version ONLY allows you to draft on a
one-to-one basis against the computer (CONTEST MODE), as opposed
to allowing you a number of different options like drafting up
to 16 teams (with the computer drafting in any number spots, or
none at all), and varying the number of players drafted at each
position. Also, you cannot alter the position of a player in the
shareware version. However, ALL REPORTS ARE IDENTICAL.
(1)
INTRODUCTION
Couch Coach Fantasy Draft, or FD, as we will refer to it in this manual,
is a system of computer programs designed to act as your drafting
opponent (or opponents) in a simulation of an actual fantasy league
draft. A fantasy league is a group of friends who act as owners, general
managers, and coaches of fictitious teams comprised of real players.
Scoring in a fantasy league is based on the performance of real players
in actual contests, with the total score of a fantasy team equal to
the sum of the scores of the "starting" players on that team.
FD was designed primarily for practice with a free fantasy draft (as
opposed to an auction-type draft), which is common to many baseball
leagues. If you are about to participate in a "player auction" draft,
FD is still very useful, since it contains statistics and information
about the players which will give you an idea as to how we value the
players. It also allows you to generate a "Bid List", which is a
listing of all players, some statistics from the previous year, and OUR
Bid Price which is changeable by YOU. This "Bid List" can be invaluable
as a reference during your actual fantasy league draft.
Some of the terms used in this manual are:
Drafting Pool - Group of fictitious teams composed of real players
where real player scores are accumulated to get
fictitious team scores.
Fantasy Team - Fictitious team comprised of real players from a
variety of real teams.
Round - Period in which each owner gets a draft choice. The
total number of rounds equals the number of players
on each roster.
Owner - Owns the fantasy team and is responsible for drafting
his/her roster of players, picking starters, etc.
Starters - Those real players whose scores count for the fantasy
team in any given period of play.
Free Agent - A real player NOT contained in the master player file.
FD free agents are not necessarily real free agents.
Compatibility.
FD is compatible with 100% IBM-PC compatibles and compatible
printers and monitors, including monochrome, color, and EGA/VGA.
CONTENTS
The Distribution diskette contains:
MASTER .??? - the master player file for the current season
FSD .EXE - the main banner program
F?D* .EXE - program modules
sportnam.TEM - a file with the names of the current real teams
COLORS .SDP - a file with default colors for screen boxes
FSD* .HLP - help files called by the program modules
SAMPLE .* - sample files for you to review and test
SERIALNU.MBR - serial number of the diskette
Neither version of FD is copy protected! Sharing of the Shareware
version is encouraged! Sharing of the enhanced version among your
drafting group is specifically allowed in the license agreement.
(2)
WAYS TO PLAY COUCH COACH FANTASY DRAFT
FD gives you the capability of playing several ways:
1) CONTEST MODE, which pits you directly against Potato League
Sports (PLS) in a 1-on-1 draft. This is also the option
required to enter any PLS national drafting contest.
2) You against a friend. In this case, FD acts as Master of
Ceremonies for the draft and Record Keeper for later on.
3) You against a friend each picking against PLS. In this manner,
FD picks against each of you, and you compare your results
against each other throughout the year. PLS can fill in as
many spots as you want (up to 16 total).
4) Your group of up to 16 people. Here again, FD acts as
Master of Ceremonies and Record Keeper.
5) Your group of up to 16 people, with the computer filling in
as many vacant spots as you desire.
* Options 2 through 5 are not available in the shareware version of FD.
INSTALLATION
Backing Up Your Diskettes.
As with most software, the first thing you should do is make a
backup copy of the diskettes (or diskette) that contain the
software. This is always a good practice, as it is time consuming
to get a replacement diskette.
Registering Your Copy.
Second, please fill out the registration form (if available) and send it
in. Prior to any communication with us, you will need to have registered
your software. Please answer all the questions as completely and
accurately as possible. If you are registered, it is easier for special
upgrades to be offered to you.
Installing On A Floppy Disk System (either 3-1/2" or 5-1/4").
After you make your backup copy, place the backup in your disk
drive. Initiate the software by typing "FSD". The system should
respond with the opening banner. If it does not, you will need to
consult the corrective action section (Appendix A).
Installing On A Hard Disk System:
Even if you are putting the system on a hard disk, it is still a
good idea to make a backup copy (or copies). After making the
backup, copy all the files from the diskette onto your hard disk. Put
all the files in the SAME directory or sub-directory. Initiate the
software by typing "FSD". The system should respond with the opening
banner. If it does not, you will need to consult the corrective action
section (Appendix A).
If you are using a floppy diskette (of either size), please make
sure that the diskette is always in the proper drive when running
the software.
It is always YOUR responsibility to make sure you have enough disk
space to run a draft. Each draft may take up about 12K of space.
(3)
OPERATION OF THE SOFTWARE
How To Enter, Make Selections, and Exit FD.
To enter FD, type "FSD" at the system prompt. Your system will respond
with a 'banner' screen that shows the version date and copyright
information. Pressing the space bar will cause the next screen to appear.
This screen shows all existing setup files at the top of the screen, a
box in the middle, and asks you to enter a setup file name. The setup
file will identify your demographic information to the software. Usually,
you will enter a filename which is a unique name of your choosing. We
suggest that you use your first name or nickname. If someone else runs a
draft on your system, they should set up their own setup file. If you are
just beginning or browsing, you may press the ENTER key.
If you reply with SAMPLE or the ENTER key, then a review of the current
scoring rules will appear, after which the Main Menu will appear when you
hit another key. If you enter a setup file name which is not listed at
the top of the screen, a prompt will come back asking you if this is a
new setup file name (in which case you type "N"), or did you type in the
wrong name and you want to try again (in which case you type "T").
A separate setup file name is NOT NECESSARY for EVERY draft, but rather
to distinguish one particular group of drafts from another.
Making A Selection With FD.
Use the arrow keys or type the first character of your intended selection
to move the pointer to that selection and then press the space bar.
How To Move Around Once You Have Entered FD.
All of the boxes in FD have similar construction and rules for
moving between and inside them. Once you know how to move around
and make selections within the software, entering statistics and
making changes is a snap. How to move around is described in the
most common help screen (available when you press F1).
Exiting Any Module and Leaving FD.
Pressing the ESCape key anywhere will either 'back up' within a module or
exit the current module and return to the main menu. TO EXIT FD, PRESS
THE ESCAPE KEY WHILE AT THE MAIN MENU.
(4)
ENTERING A SETUP FILE
A setup file contains information which identifies you to the
system. If you enter a Potato League Sports contest, the setup
file will provide PLS with information for contacting you.
When selecting the "ENTER Setup Module" from the main menu, you will be
presented with a screen showing all the questions to be answered. If you
are working on an existing file, the existing selections are shown so
that you can change them. If you want to change a selection that you have
already made on this screen, use the up arrow to move upward.
Following are the questions contained in the "ENTER Setup" routine:
Name of your fantasy team:
The name of the team will appear on top of all reports. This name
can be up to 20 characters long. Use upper and/or lower case.
Your Name:
This name also appears on top of every report. It can be up to 20
characters long. This name will be the "resident commissioner".
IMPORTANT: Your correct name, along with your entire address, is VERY
important when submitting an entry in our national contest!
Mailing Address:
You are allowed two lines for your "street address". If you like,
you may add a company name in the address.
City:
You are allowed 25 characters for your city. NOTE: Foreign locations
might want to enter both the city and location (province, county,
township, etc.) on this line.
State:
Enter in the 2 character abbreviation of your state or province.
Country:
Enter the correct country code from the codes listed.
Phone:
Please follow the (xxx) yyy-zzzz format. If you have an
international phone number, simply put that in with dashes.
Comments:
The comments are used by Potato League Sports if you submit
a draft in any of our contests. PLS reads these comments and uses
them as necessary. You might name your favorite real team here.
Also, any information throughout the rest of the setup routine which you
might think is unclear may be expanded upon on these lines (i.e.
finishing an unusually long address, etc.)
Completion of the setup.
After these selections are complete, the data file describing
you has been set up and you are ready to proceed.
(5)
CHANGING PLAYER DATA
This module allows you to edit data for all players supplied in the
master data file. Possible changes include changing a player's real team
designation, making players inactive (and re-activating them), changing a
player's position, and changing the "Bid Price" associated with a player.
You may select players by their position or by their real team.
While in the Change Player Data module, these function keys are active:
F1 - Help
F2 - Locate a player by his Real Team
F3 - List modified position of all players
F4 - List player Bid Prices (see below)
After highlighting a player by pressing the space bar while the arrow is
in front of his name, you may do the following:
Change The Real Team Designation Of A Player.
Type R for real team. The real team selection box is located
beneath the position selection box. Move the pointer to the correct
new team, then select the team by pressing the space bar, and
confirm the selection by pressing the ENTER key.
Change The BID PRICE Of A Player:
Included with the Master List of players is a "bid price" for each
individual player. This Bid Price is important as a guide during
your actual fantasy league draft. Although a Bid Price is already
assigned to each player, this value can be changed to reflect the
price that YOU feel each individual player is worth, as it relates
to a typical fantasy league "auction" draft. Therefore, you can
print out a "MASTER LIST" of most of the players and the price YOU
WOULD PAY for those players.
Change The Position Of A Player.
The positions of all players are set by PLS prior to each season. A
player's position CAN be changed, and from that point on the player
will show up, and be available to be drafted, at that new position.
However, WHENEVER YOU SELECT THE CONTEST MODE OF DRAFTING, FD will
automatically use the original positions for all players (this
information is stored and not changeable). This is imperative in
order to allow everyone equal "footing" during the draft.
Change A Player's Active Status.
When the player is active, Typing I will inactivate that player. If
a player is inactive, '-NA' will appear in that player's name (for
Not Available). The whole name shows for healthy players, unless
they started as inactive when the master data file was last read.
When the player is inactive, typing "A" will activate that player.
IMPORTANT NOTE: In the CONTEST MODE, the computer may draft players that
you have designated inactive in order to be fair to all contest entrants.
(6)
DRAFTING FANTASY TEAMS
This is the main module of FD. You have numerous choices regarding
the parameters of each draft (except in the shareware version). If you
elect to take the standard you-vs-computer (CONTEST MODE) option, then
you won't have to make further setup choices. If you don't choose this
mode, you will be asked to specify the drafting order, how many owners
will participate in the draft, how many of them will be filled by you
(and/or your friends, along with how many spots the computer will draft
in), and what the roster requirements for each position are.
Choice Of Leagues.
With certain sports, you have the opportunity to select which league,
conference, or division that you want to confine your selections to. For
example, with baseball you may choose the American League, National
League, or include players from Both Leagues.
Naming Each Draft.
You may draft as often as you like with FD, and there are
numerous ways to set up a draft, as noted earlier in the section
on "Ways to play FD". Each time you begin a new draft, you may
call the new draft by a new name. You are allowed up to 8
characters and the result must be a legal DOS filename (consult
your DOS manual). Do NOT use punctuation marks or spaces!
Draft Order.
This software supports forward or switchback order for drafting.
Forward order always has the first team draft first in each round.
In the contest mode, Forward order is used. Switchback order,
which is the most common for pools, starts even numbered rounds
with the last team from the prior round and proceeds back to the
first team (Round 1=1-2-3-4, Round 2=4-3-2-1, Round 3=1-2-3-4....).
The Drafting Screen.
At each owners turn, the top left hand of the screen shows the
position requirements for that owner, including filled and total to
be filled at each position. The large boxes in the middle are used for
the display of players, either by position or by real team. The lower
left box is reserved for displaying last season's statistics for a
selected player.
The Drafting Process.
When it is your turn to select a player, you may find & select that
player by position (highlight the proper position initials in the upper
left corner box, and a list of those players will appear on screen), or
by real team (using the F2 key). You may also pick up a free agent by
using the F3 key. If you pick up a free agent, you will be expected to
enter his name, select the appropriate position, and select the proper
real team for that player.
When there are more than 60 players at a position, a message will
be presented at the bottom of the screen stating how to see more
players (using the PgUp and PgDn keys).
After you highlight a player as the one you want to draft, the player's
statistics for last season are presented for your review in the lower
left corner box. You may then either press Y (or ENTER) to confirm this
player as your draft selection, or ESCape to reconsider and possibly
choose another player. BY PRESSING Y (or ENTER) YOU ARE SELECTING THIS
PLAYER, AND CANNOT CHANGE THIS PICK!
(7)
ADDING FREE AGENTS.
Pressing the F3 key, while in the DRAFTING module, will add a free agent
by asking three things: 1) The player's name (last name first - i.e.
Smith John); 2) the position of the player (by highlighting the proper
position initials in the upper left corner box); and 3) the real team of
the player (by highlighting the appropriate real team in the lower left
corner box).
Once you have added a free agent, you will not have to enter that
person as a free agent in a separate draft since his name will be added
to the Master Player File. You may add a maximum of 50 free agents.
IMPORTANT NOTES:
1) Any free agents added will not be presented in alphabetical
order in subsequent drafts (unless their name really falls at
the end of the list!), so remember to search the whole list for
players that you have added before.
2) If you lose the Master Player File, or copy it from the original
disk after adding free agents, all those additions will be lost and
you will need to enter them again.
Why Aren't All Players Included In The Master Player File?
There are several reasons. First, disk space was a consideration.
Second, the more players in the file, the longer it will take to
read them all in (and reading them in takes place each time a new
module is entered). Third, we wanted the information to fit under
a memory capacity of 256K, so that most computers could be
compatible with FD. Having less players also rewards those
people who seek out and find the best "free agents" available.
Review Options.
Pressing F4 or F5 will let you review any prior picks. F4 will
review the picks by round, while F5 will list selections by position.
Second Thoughts.
When FD asks you to confirm your pick, you may "back up" by
using the ESCape key. You may not, however, go back and change
a player selected in an earlier round (just as you could not in
a live draft). Your only recourse is to start a new draft!
Potato League Sports Picks And Logic.
Although a fairly sophisticated picking strategy has been used to pick
players for the upcoming season, you may feel that some of the picks are
odd, or questionable at best. To some extent, this reflects experience
with many actual drafts - everyone has their own surprise picks,
including Potato League Sports! You may be surprised at how well our
"surprise" picks do - so might we (embarrassingly so). You might also
keep in mind that, for distribution purposes, the selections are made at
least two to four months prior to the season, when actual opening day
rosters are not complete.
(8)
HELP!
Here is the help screen presented when you press F1 while in the
DRAFTING module:
COUCH COACH FANTASY DRAFT - HELP
To move within boxes that contain selection arrows, use the following keys:
KEY FUNCTION
-----------------------------------------------------------------------------
arrows Moves the selection arrow in the desired direction. Will move within
the specified bounds of the box or across single line boxes.
Esc Gets you out of the box immediately (escape!).
space bar Selects or de-selects the choice being pointed at. The choice will
be highlighted if selected, or lowlighted if de-selected.
A-Z,0-9 Entering the first character of your choice moves directly to the
next choice that starts with the character you entered.
PgUp/PgDn Displays more players in the category - PgUp shows prior
(alphabetic) players while PgDn shows later players.
Function Keys ( F1 calls this screen )
----------------------------------------------------------------------------
F2 Show remaining players by real team F7 Show/Omit Real Team in Display
F3 Pick up a free agent F8 Show/Omit Stat Totals in Display
F4 Review prior selections by round F9 Turn Drafter's Aid On/Off
F5 Review prior selections by position (F9 not active in CONTEST mode)
F6 Review Scoring Rules F10 Turn Browse Stats Mode On/Off
___________________________________
Here is the normal help screen presented when you are NOT in the
DRAFTING module.
COUCH COACH FANTASY DRAFT - HELP
When asked for information, with a (Y/N), the first choice (Y, in this case)
is the "default" response. The default is taken if any key is pressed but the
non-default (N, in this case) response or the ESCape key.
To move within boxes that contain selection arrows, use the following keys:
KEY FUNCTION
-----------------------------------------------------------------------------
arrows Moves the selection arrow in the desired direction. Will move within
the specified bounds of the box or across single line boxes.
Esc Backs up to the last prompt or out of the current module (escape!).
space Selects the choice that the selection arrow is pointing at. The
choice will be highlighted if selected.
A-Z,0-9 Entering the first character of your choice moves directly to the
next choice that starts with the character you entered.
PgUp/PgDn Displays more players in the category - PgUp shows prior
(alphabetic) players while PgDn shows later players.
If any function keys are active, they are shown at the bottom of your screen.
(9)
PREPARING A DISKETTE FOR SUBMISSION
After you have completed a "CONTEST MODE" draft, you are invited
to submit your picks to PLS to compete against all others submitting
picks. Details of each contest are separate from this manual.
You will be asked to provide the name for the draft that you want
to submit and the disk drive containing your "submission
diskette". (You may use any formatted diskette to submit a contest
entry.) Provided that there are no media errors and all the files
exist, then this operation is very simple and short. FD will
copy the files containing your serial number, your setup file
containing your address and contact information, your adjusted (for
any free agents you added) player pool, and the particular draft
that you named. It is important that you do not "fool" with any of
these files outside of FD. To retain control over the fairness
of the contest, certain drafting sequences and codes are used and
will be contained in these files. PLS reserves the right to
reject any entries.
Instructions for submitting the disk are in the software, and
basically consist of mailing the diskette along with a printout
of the draft and an update service fee to PLS.
GENERATE REPORTS
Some reports will be similar regardless of the sport, others will differ.
Here are the reports for the Football, Basketball, and Baseball versions.
Scores of Players by Fantasy Team.
This report provides a roster for each fantasy team with last year's
total scores and the total by team. Optionally, you may ask for
totals by position.
Rank Players by Position by Stat Category.
There are numerous different options for sorting and printing this report:
1) Total Points for each position.
Ranks players by position in descending order of total points.
2) Individual statistical categories. Here is a sampling of how each
sport ranks the players (you can obtain an entirely different
ranking based on ANY category listed below) :
FOOTBALL FOOTBALL FOOTBALL
-------- -------- --------
position QB,RB, and WR Kickers Defensive/Special Teams
by Rushing yards Extra Points Td & Safeties scored
Receiving yards Field Goals < 30 yds. Sacks
Passing yards Field Goals 30-39 yds. Interceptions & fumbles
TD's scored Field Goals >= 40 yds. Blocked punts & kicks
returned for TD's
BASEBALL BASEBALL BASKETBALL
-------- -------- ----------
position Hitters Pitchers Guards, Forwards, Centers
by Average ERA Points scored
Hits Strikeouts Rebounds
Runs Wins Assists
RBI's Saves
Stolen Bases
(10)
Generate Bid Price List.
This report gives you a printout of players, ranked on the Bid Price of
each player (initially, FD comes with a bid price established by Potato
League Sports, but this can be changed by you). Some statistics, along
with each player's point total from the prior season, will also be
listed on the printout.
SYSTEM UTILITIES
Utilities are provided to assist with some activities that you
might want to perform.
The following utilities are offered for assistance in setting up
and operating your pool:
List File Directory
Examine Contents of a File
Change Setup File Name
Box Outline Color Modification
LIST FILE DIRECTORY allows you to examine the files in your current
directory, sub-directory, or diskette. You will be asked whether you want
to look at all files or pick a specific subset of files. Use the normal
DOS wildcards (consult your operating system manual for these) to specify
which subset of files to search for.
EXAMINE CONTENTS of a FILE allows you to look at any individual file on
the screen. The screen will pause after each 22 lines printed, and you
can also stop it from scrolling by pressing the space bar. If you press
the Escape key, the utilities menu will return. We recommend that you
examine files prior to printing them whenever possible.
CHANGE the SETUP FILE NAME allows you to switch from the Setup File Name
currently in use to another without having to ESCape from FD entirely,
and then restart.
BOX OUTLINE COLOR MODIFICATION allows you to change the colors of the
outlines of the boxes that appear on the screens. Choose the colors by
number and press Escape when you are finished. As you can probably guess,
this isn't necessary unless you have a color monitor.
(11)
APPENDIX A - Errors And Corrective Action
Here it is! The section that is supposed to tell you what went
wrong and how to correct it. Well, let's hope this helps.
There are three types of common errors:
1) Errors caught by FD and reported, such as "out of disk
space" and "drive unavailable" and "file doesn't exist".
REMEDY: Most of these errors are caused by the user (YOU!). Check
to make sure you have enough disk space prior to starting a draft,
make sure the door on your disk drive is closed, etc. Normally,
these errors are minor in nature, and can be easily resolved.
2) Errors caught by our friendly compiler, but not by FD. These result
in "Error number XX at line YYYY".
REMEDY: Although FD was extensively tested, with no instance of
this reported, PLS can't guarantee this won't occur. If it happens,
please note the message and feel free to call us (if it isn't
obvious what the remedy to the problem is).
3) Errors not caught by the compiler or FD. There are two types here:
a) Calculations made by FD. if you think FD has
calculated something wrong, please check your work
and then, if still convinced, let PLS know!
b) System hangs / disk media errors / other unknown
REMEDY: In the event of any "hangs" or "stoppages", check your
printer, making sure it is on and on-line. In the event of disk
media errors, make another copy of the original diskette and try
using it.
You may also encounter problems if you use "memory-resident" software,
If you suspect this might be a problem, re-boot your machine WITHOUT
loading any memory-resident software (i.e. renaming your AUTOEXEC.BAT
file and re-booting until you are finished with FD, then renaming it
back to AUTOEXEC.BAT).
Whatever the reason for consulting this section, if you can't find the
remedy, do NOT get frustrated - call for help. We are always happy to
help in any way we can!
Lastly, we have over a thousand people using our software, and you can
rest assured that it does work or can be made to work if you have the
right hardware setup.
POTATO LEAGUE SPORTS
4569 Mission Gorge Place, #B
San Diego, CA 92120
(800) 537-9228 - orders
(619) 282-8186
(12)
Disk No: 2078
Disk Title: Fantasy Sports Drafter
PC-SIG Version: S1
Program Title: Fantasy Sport Drafter
Author Version: 2.5
Author Registration: $19.95
Special Requirements: Hard drive recommended.
What is more fun than collecting and trading baseball cards; sweeping
the nation to the tune of more than 1.5 million players -- and growing;
permits you to rub elbows with owners, starters and free agents;
provides you the opportunity to compete against other players; and,
doesn't stick to most dental work? It's Fantasy Leagues!
Fantasy Leagues are springing up across the country, covering baseball,
football, basketball -- all major league sports. Developing your fantasy
team from the real players in the major leagues, you earn points
depending on how a real player performs during a season. But how do you
put your team together?
FANTASY SPORT DRAFTER provides you with a computerized opponent in the
team draft arena. You can go up against it as many times as you wish,
learning the ins and outs of actual fantasy drafting. When you're done,
you'll have assembled your own sport team from the best of the major
leagues in that sport. You'll hardly be able to wait for the start of
the season.
After you have developed your team, FANTASY SPORT DRAFTER provides you
the ability to submit your picks to a fantasy sports center to compete
in an actual drafting contest. Your team may win the title of Fantasy
Team Champion.
PC-SIG
1030D East Duane Avenue
Sunnyvale Ca. 94086
(408) 730-9291
(c) Copyright 1989 PC-SIG, Inc.
╔═════════════════════════════════════════════════════════════════════════╗
║ <<<< Disk #2078 FANTASY SPORTS DRAFTER >>>> ║
╠═════════════════════════════════════════════════════════════════════════╣
║ To unarchive program, type: PKUNZIP FANDRAFT (press enter) ║
║ To start program, type: FSD (press enter) ║
║ ║
║ To print documentation, type: COPY FDMANUAL.DOC PRN ║
╚═════════════════════════════════════════════════════════════════════════╝
Hello! Congratulations on obtaining the ultimate in fantasy sports drafting
software - The Fantasy Sports Drafter, from Potato League Sports!
To begin using the Fantasy Sports Drafter, just follow these steps:
1) If you prefer, create a separate sub-directory for the Fantasy
Sports Drafter on your hard drive
2) Copy the contents of this entire diskette into this sub-directory
of your hard drive
3) Type in the following command: PKUNZIP FANDRAFT
4) The computer will "unzip" the contents of this file and you are
ready to begin!
5) To start the Fantasy Sports Drafter, type FSD
After you have copied and "unzipped" the files, we suggest you obtain a
hard copy printout of the User's Manual (a file called FDMANUAL.DOC ).
We hope you enjoy the Fantasy Sports Drafter! Versions are available for
football, baseball, and basketball. For more information contact Potato
League Sports.
Volume in drive A has no label
Directory of A:\
FANDRAFT ZIP 176448 11-25-89 7:43p
FILE2078 TXT 2961 1-29-90 3:47p
GO BAT 38 1-01-80 1:37a
GO TXT 617 1-30-90 11:19a
PKUNZIP EXE 21440 7-21-89 1:01a
README DOC 1011 1-02-80 4:47a
6 file(s) 202515 bytes
117760 bytes free