Home of the original IBM PC emulator for browsers.
[PCjs Machine "ibm5170"]
Waiting for machine "ibm5170" to load....
NAMEPAL is the complete automatic address book. It keeps lists of
names, addresses, phone numbers, and related comments, and prints them
in a pocket-size "book" you can use anywhere. NAMEPAL works on plain
paper with any printer -- even lasers. You can optionally print on both
sides of each page, and you can code your data to keep track of club
members, birthdays, babysitters, or any other grouping. It also
performs other handy tasks, like printing mailing labels, Rolodex card
files, and full-page rosters. NAMEPAL is also completely menu-driven,
and has on-line help screens.
Disk No: 706
Disk Title: NamePal
PC-SIG Version: S2.0
Program Title: NamePal
Author Version: 1.46
Author Registration: $19.95
Special Requirements: None.
NAMEPAL is the complete automatic address book. It keeps lists of
names, addresses, phone numbers, and related comments, and prints them
in a pocket-size ``book'' you can use anywhere. NAMEPAL works on
plain paper with any printer -- even lasers. You can optionally print
on both sides of each page, and you can code your data to keep track of
club members, birthdays, babysitters, or any other grouping. It also
performs other handy tasks, like printing mailing labels, Rolodex card
files, and full-page rosters. NAMEPAL is also completely menu-driven,
and has on-line help screens.
PC-SIG
1030D East Duane Avenue
Sunnyvale Ca. 94086
(408) 730-9291
(c) Copyright 1989 PC-SIG, Inc.
╔═════════════════════════════════════════════════════════════════════════╗
║ <<<< Disk #706 NAMEPAL >>>> ║
╠═════════════════════════════════════════════════════════════════════════╣
║ To start program, type: NAMEPAL (press enter) ║
║ ║
║ To print documentation, type: PRINTDOC (press enter) ║
╚═════════════════════════════════════════════════════════════════════════╝
N a m e P a l (1.44)
Data Base for Names, Addresses, Telephones & Comments
Prints Mailing Labels
Pocket-size Address Books
Rolodex & 3x5 Cards
Full Page Rosters
Envelopes & Custom Labels
Program and Documentation
Copyright 1989 by
WR Software
P.O. Box 4819
Walnut Creek, CA 94596
Registration $19.95
Permission hereby granted to make exact copies of
Program and Documentation
N a m e P a l
Table of Contents
Getting Started
Introduction..........................................1-1
Setting Up Disk Files.................................1-1
Program Loading.......................................1-2
Using a NamePal Menu..................................1-2
Help..................................................1-2
Record Types..........................................1-2
Vary Setup............................................1-3
States & Area Codes...................................1-3
Record Selection
Introduction..........................................2-1
Personal and Business Names...........................2-1
Last Name/Key (or portion)............................2-1
Categories or Cat.(s).................................2-2
Revise Categories.....................................2-2
Record Number.........................................2-3
Summary...............................................2-3
Commands
Adding Records........................................3-1
Changing Records......................................3-1
Modeling Records......................................3-2
Deleting Records......................................3-2
Summary...............................................3-2
Printed Listings
Introduction..........................................4-1
Choosing Records for Printing.........................4-1
Sequence & RE-SORT....................................4-1
Address Book..........................................4-1
Labels................................................4-2
Custom Labels & Envelopes.............................4-3
Page Size & File Cards................................4-3
Setup Printer (Compress, etc.)........................4-3
NamePal User Manual
GETTING STARTED 1-1
Welcome to NamePal, the complete automatic address book. It will keep
your lists of names, addresses, phone numbers, and related comments
on your computer, and then print them out in an address book that
you can use anywhere. The address book can be almost any size, and
can be optionally printed on both sides of each page like a real
book. You can code your data to keep track of friends, club members,
pizza places, or any other grouping that is important to you. NamePal
also performs other handy tasks, like printing mailing labels,
Rolodex card files, and full-page rosters.
Best of all, NamePal is quite easy to use. The program is completely
"menu-driven" so choices are made from a list of options. These
options are described on-screen in Help messages, if you want
assistance. You can also select an on-screen introduction to the
entire program.
NamePal is a "shareware" program, so you are encouraged to try it out
and make copies for friends. If you like the program and continue to
use it, we ask that you send in a $19.95 registration fee (mail to:
WR Software, PO Box 4819, Walnut Creek, CA 94596 U.S.A.). When you
register, you are sent the latest version of NamePal, along with two
pocket-size vinyl address book covers, book mounting templates, and
printed documentation. You also receive a separate Export/Import
program that lets you exchange name data with other programs, such as
word processors (for mail merge) and data base programs. We will also
provide free program support and information about future upgrades.
If you decide not to register because the program isn't quite right
for you, we would really like to know why. For example, NamePal may
not meet all your needs, or may not work correctly with your printer.
We want to fix these kinds of problems whenever possible, so please,
take a few minutes and tell us about them.
Setting Up Disk Files
This documentation is more helpful if you read it at your computer,
and try out the various commands. To use NamePal you will need DOS
2.1 (or later), and at least 128K of memory. To begin, copy the
NamePal diskette to another floppy or your hard disk, and save the
original disk as a backup. Floppy users should format a new diskette
(FORMAT B:), and then make the copy (COPY A:*.* B:).
Hard disk users should be logged on to the hard disk, so the DOS
prompt "C>" is showing. You will probably want to set up a directory
for NamePal, for example one called "NP". Type "MKDIR \NP" and press
<Enter> to create the directory, then type "CHDIR \NP" and press
<Enter> to change to the new directory. Finally, insert the NamePal
diskette into floppy drive A, and type "COPY A:*.*" and press <Enter>
to copy the files to your hard disk.
GETTING STARTED 1-2
Program Loading
NamePal will use the date in your computer to tell you when names
were added or changed on your file. If your system asks for the date
when you turn the computer on, you should reply with the correct
current date. At the DOS prompt (for example, A>) type NAMEPAL and
press the <Enter> key. After the program loads, you will see an
introductory message. Press any key to advance to the Main Menu.
Using a NamePal Menu
A "menu" is a list of things you can do with NamePal. You can select
menu items by pressing their first letter ("a" or "A" for "Add"). You
can also use the down arrow key to move the "light bar" until the
item you want is highlighted, and then press <Enter>. Another way
is to choose the number next to the menu item you want (press "1"
for "Add"). If you select "Quit" (or press the ESCape key) on the
Main Menu, you will leave NamePal and return to DOS. Doing the same
thing on any other menu will return you to the Main Menu.
In the upper left-hand corner of the Main Menu is a count of records
on the file. The original NamePal files contain a few sample records
to help demonstrate the program. If you are using a floppy diskette,
be sure to leave it in the computer drive from now on.
HELP
If you select "HELP" on the Main Menu, you will begin a brief
on-screen introduction to NamePal. The bottom of your screen shows
directions for viewing or exiting this introduction. You can also use
the function keys to get additional HELP on any NamePal menu. Use the
function key that corresponds to the menu number you want help with
(for example, for help with "2. Change," press the F2 function key).
The valid HELP function keys are displayed on the right side of every
NamePal menu.
Record Types
There are three kinds of records you can add to NamePal. Select ADD
on the Main Menu to see the record types: Personal, Business, and
Notecard. The Notecard record is a freeform layout that lets you
enter up to seven comment lines with any kind of information.
Notecard records are used for miscellaneous notes and additional
comments for "name" records. Notecard records can also hold "printer
setup" codes, if you want to change the standard character size or
style on printed reports. See "Printed Listings--Setup" for more
information about this feature.
GETTING STARTED 1-3
Personal and Business records are very similar. Both contain places
for name, address, phone, category, and comment data. The KEY to
Personal records is the Last Name, while Business records have a KEY
that is separate from the name of the business. Records can be
selected by their KEYs, for changing, printing, etc. Records are also
selected by their Type, Number, or Category (see "Record Selection").
Personal records are alphabetized (sorted) by last name, but if the
last names are identical, then part of the first name is also used.
For example, Bob Smith will come before Jim Smith. Business and
Notecard records are alphabetized by their KEYs. Also, records can
be sorted by their "re-sort" field, if you need printouts in another
order. For example, you might want mailing labels printed in Zip Code
sequence.
Vary Setup
You can use VARY SETUP to change mailing label widths and the size
of printed ADDRESS BOOKs. See the "Printed Listings" section for
more information about these settings.
Select VARY SETUP and then PRINTER to change the way "page skips"
are handled by your printer. Printer Setup has three options:
DEFAULT, STD EJECT, and CUSTOM. The DEFAULT setting creates "line
feeds" only, and is the best choice if you hand feed each sheet of
paper individually into your printer. The STD EJECT option uses
ASCII (12) for page ejects (form feeds), and is the best choice for
most printers. Select the STD EJECT option first, and see if FULL
PAGE and ADDRESS BOOK reports work correctly on your system. If STD
EJECT doesn't work with your printer, you should look in your printer
manual for the "page eject" code (also called "form feed" or "top of
form"), and then enter this 'decimal' number using the CUSTOM option.
If you have a color monitor, you may want to change the colors on
your display. First, select VARY SETUP, and then MONITOR. Each time
you select FOREGROUND or BACKGROUND on the VARY COLOR menu, your
screen will change to a new color combination. When the colors you
desire are on the screen, exit this menu (Quit) and your color choice
will be permanently saved.
States & Area Codes
Select STATES/AREA CODES on the Main Menu to see a list of these
tables. One set of tables contains the official Post Office two-
letter state abbreviations. There is also a telephone "reverse" area
code directory -- if you know the area code, the directory shows you
which state has that area code.
RECORD SELECTION 2-1
There are a number of ways to access NamePal records. You can use
the sample records that come with NamePal to demonstrate the various
selection commands. The INQUIRE command lets you look at records on
your file, but not revise them. If you choose INQUIRE from the Main
menu, the next thing you see is the "Selection" menu.
The Selection menu shows all the ways you can choose records. This
same Selection menu appears with the other primary commands (PRINT,
CHANGE, DELETE, and MODEL). After you learn how to select records
using INQUIRE, you will know how to select records for any purpose.
Notice that the lower left-hand corner of the Selection menu screen
displays the menu choice you made previously (in this case, INQUIRE).
This "history" of menu choices appears on every display after the
Main Menu. It shows all the menu choices you made prior to the
current menu.
Personal and Business Names
If you choose PERSONAL NAMES on the "Selection" menu, NamePal chooses
all the names on the file added with the "Personal" record format.
Using the file that comes with NamePal, you see the record for
"Robert A. Samuelson." The KEY to this record is the last name:
"Samuelson." This is the only "Personal" record (Type "P") on the
demonstration file. If there was more than one "Personal" record, you
would first see a list of the names.
Now select INQUIRE again, and then BUSINESS NAMES. With the initial
file you see a list of Business records in alphabetical order. Each
line shows a "select letter," the Business KEY, the Record Number,
the Type ("B" for Business), and the Categories, if any. You can
press the "select letter" displayed in the far left column, to choose
a record. You can also use the "cursor down" key until the desired
record is in the highlight bar, and then press <Enter>. If there were
more than 20 records to list, "more..." will appear at the bottom of
the screen, and pressing the F2 (More) function key will display the
next 20 items. Press F1 (Quit) to return to the Main Menu.
Last Name/Key (or portion)
This search finds records whose "keys" match the letters you enter.
Select INQUIRE on the Main Menu, and then choose LAST NAME/KEY on the
next menu. NamePal will ask "Which Key?". Type in "Sam" (capital "S")
and press <Enter>. You can use the Backspace key to correct mistakes.
You should see a list of records that have "keys" beginning with
"Sam..." Use the SEL(ect) letters or the highlight bar to look at
each record.
RECORD SELECTION 2-2
To find a single record without first seeing the list, type enough of
the name so that it is unique on your file. For example, to see the
"Samuelson" record, just type "Samu" in response to "Which Key?" Of
course, you could also type the entire last name. To see all names
beginning with a certain letter, enter just that letter.
You can also put an asterisk (*) as the first part of the KEY,
followed by some letters. Then NamePal finds all the KEYs that have
these letters anywhere in the KEY, not just at the beginning. For
example, use "*Rob" to find "Samuelson, Robert." As with all NamePal
searches, the upper and lower case letters must match exactly ("Rob"
does not match "rob" or "ROB").
Categories or Cat.(s)
The CATEGORY is a way of classifying groups of name records. For
example, you might assign people in your Art Class the category of
"A". Each name on your file can be put in up to eight different
categories. Once you have coded the people in your Art Class with an
"A" in their category field, you can use a CATEGORY select to print a
roster of the class, or create mailing labels for the class, etc.
On the main menu, if you select INQUIRE and then CATEGORY, NamePal
will ask "Which Category?". Type in "s" (lower case) and press
<Enter>. From the initial disk you will see that three records have
been selected. You can choose the one you want using the "select
letter," or the highlight bar. These records are in the "Printer
Setup" category. They can be used for some special printing needs
(see "Printed Listings--Setup").
There are many ways to use categories. You could put a category of
"C" on the records of everyone who receives your Christmas or
Chanukah cards. Then with one category selection, you could print
address labels for all these cards.
Revise Categories
Since there are only 8 category positions per record, you will want
to use single letters or numbers whenever possible. You can select
REVISE CATEGORIES (Main Menu) to enter a short description for up to
15 of your categories. These descriptions will be displayed when you
Add or Change a name, or do Category Selections.
RECORD SELECTION 2-3
There is a warning message and tone if you use category letters that
have not been defined with REVISE CATEGORIES. However, it is not
required to define categories in order to use them (you are NOT
limited to the 15 categories that have descriptions). Any character
on the keyboard can be used for a category. Using just the upper and
lower case letters, 52 different categories are possible.
Record Number
You can choose records using their number on the file. The record
number is shown when you add or view records, and on PAGE SIZE and
FILE CARD printouts. For Printing, you can use Record Number to
select as many specific records as you desire.
Summary
The record selection methods described above for INQUIRE, work the
same way for all Commands (CHANGE, DELETE, PRINT, etc.). Regardless
of what you do with the records after you choose them, the selection
techniques are identical.
COMMANDS 3-1
Adding Records
To put new records on your file, select ADD on the Main Menu and then
choose the type of record you wish to add (Personal, Business, or
Notecard). You will see blank lines for each kind of information
(name, address, phone, etc.). As you type in the data, you can use
the arrow (cursor), Ins(ert), Del(ete), and Backspace keys to move
around on the screen and correct mistakes.
As you finish typing each item, press <Enter> to move to the next
line. To skip an item press <Enter> or the "cursor down" arrow key.
When you finish entering data for a record, push the F2 (Update)
function key to put the record on your file. After you ADD the last
record, press F1 (Quit) to exit the ADD process (or press the ESCape
key). The meaning of the F1 and F2 function keys is shown on the
right side of your display. The right side also displays Categories
you have defined with the REVISE CATEGORIES option (described above).
Business format records have both a KEY area (used for selection and
sorting), and a BUS. NAME area (used for printing, as on mailing
labels). Usually you will want the same Business Name in both places
(for example, Acme Printing). If you first type the name in the KEY
area, and then type only an equal sign (=) in the BUS. NAME area, the
name from the KEY field will be copied for you.
The bottom right side of the screen displays warning messages. The
message "Category not defined" appears when you use categories not
yet entered with REVISE CATEGORIES. The message "2 1/2 inch label
exceeded" (or "2 5/8" or "3") appears when name or address lines are
too long to fit on these address labels (assuming 10 characters per
inch on your printer). It's OK to enter longer names and addresses,
but NamePal will have to shorten them when you print 2 1/2, 2 5/8,
or 3 inch labels. NamePal will print as much of the name and address
as possible. Personal names print without the end of the first name,
while Business names and addresses truncate the end of the line.
If you find that four comment lines are not sufficient for some of
your names, you can add a Notecard record with the same key and a
"-1" suffix. This will provide seven more comment lines. You can add
any number of these "suffix" records (-2, etc.).
Changing Records
To revise existing records on your file, select CHANGE on the Main
Menu. You can then select records using the methods discussed in the
chapter on Record Selection. As records are chosen, they will appear
on your screen in the ADD format.
COMMANDS 3-2
The editing keys (cursor arrows, Del, etc.) work just like they did
during the Add command. When you finish changing the record, press
the F2 (Update) function key to replace the record with the changes
you have made. Or press F1 (Quit) if you decide not to save the
changes to the record. The F1 and F2 function keys appear on the
right side of the screen with their meanings.
Modeling Records
Main Menu choice MODEL lets you copy the data in an existing record
to create a new record. After selecting the record you want to copy,
you can modify it. When you finish changing the data, you can add it
to your file as a new record. Use Model to save keying time when you
add names with similar addresses (for example, the same City, State,
and Zip).
Deleting Records
Choose DELETE on the main menu to get rid of unwanted records. Select
the records in the usual manner. As each record appears on your
screen, reply "Y" if you wish to "Delete this one (Y/N)?". The file
space occupied by deleted records is automatically re-used by new
records as you add them to your file.
Summary
A good way to get started with these commands is to experiment with
them. Try ADDing some records. Then use the various Record Selection
methods to CHANGE, MODEL and finally DELETE the new records until you
are comfortable with all the commands. Use the function keys to get
HELP when you need it.
PRINTED LISTINGS 4-1
When you select PRINT on the main menu, the next thing you see is the
FORMAT menu. This menu is used to choose between different kinds of
printed output. The first three LABEL choices are for address labels.
ADDRESS BOOK prints book pages in a wide variety of sizes. PAGE SIZE
prints various reports on 8 1/2 by 11 inch pages. FILE CARDS prints
3x5 or Rolodex rotary file cards (two sizes). CUSTOM LABELS prints on
any size address label or directly onto envelopes.
If you have trouble with PAGE SIZE or ADDRESS BOOK printing, see the
Getting Started section (VARY SETUP) for information on printer page
ejects. All output formats, including Address Book pages, are
designed to print using standard pica type (10 characters per inch).
With many printers you can change this with the SETUP (COMPRESS, ETC)
option that is described below. This can be useful, for example, to
print smaller address books.
Choosing Records for Printing
Select records for printing the same way as for other purposes
(Change, Inquire, etc.). See the section on Record Selection if you
have questions about how to do this. When choosing records for
printing, you are shown a count of the selected records on the bottom
of your screen, rather than seeing the actual records. Once you start
printing, you can pause or quit, by pressing the Esc(ape) key.
Along with the selected record count, you will often see the message
"No Notes." This means that Notecard records have been excluded from
the selection process. This happens when you select a type of listing
that cannot print the "notecard" format (like mailing labels).
Sequence & RE-SORT
The Sequence Menu lets you choose the order in which names will be
printed. Usually, you will want to choose LAST NAME/KEY, which will
alphabetize records by Last Name or Business KEY. You can also select
FILE REC#, in which case records will print in Record Number order
(basically, the order in which the records were added to the file).
Finally, you can specify RE-SORT. Then records will be ordered by
what is put in the RE-SORT area of each record, such as Zip Code.
Address Book
You can change the size of address book "pages" using the VARY SETUP
option on the main menu. The LEFT MARGIN is the number of spaces on
the left side of the book border. The TEXT COLUMN WIDTH is the number
of characters for each name, from the start of the name to the end of
the phone number. The COLUMN SPACING is the number of spaces between
columns. The NUMBER TEXT LINES controls the vertical size of the page
by setting the maximum lines used for printing names, addresses, etc.
PRINTED LISTINGS 4-2
The NUMBER TEXT LINES must be a multiple of 8 with a maximum value of
80 (possible values are 8, 16, 24, 32, 40, 48, 56, 64, 72, or 80).
Use these settings in combination with "compressed" printer setup
(see below) to produce the exact book "page" size that you need.
These book "pages" are printed on regular 8 1/2 by 11 inch paper.
There are several ADDRESS BOOK formats available (optional phone,
address, comments, etc.). The book format lets you "preview" the
output on your monitor, to see the various output styles and the
names selected for printing. Record Number, categories, and the Date
Added/Changed data do not print in the Address Book format.
You may choose to print your address book on BOTH SIDES of each page.
This gives the book a more professional appearance without any blank
pages. With the BOTH SIDES option, book pages must be centered (equal
left and right margins). Use the VARY SETUP "Left Margin" setting to
center Address Book "pages" on your printer. After printing the first
side of each numbered page, the computer will prompt you to turn the
page over and re-insert it in your printer to print the back side. If
you print a Title Page, it should NOT be re-inserted.
To assemble the book, first cut along the dotted outline of each
page. Then fold each page in half so the left column of names lies
over the right column. If you use a title page, it should be face
down while folding. Finally, place all the pages on top of each other
in the correct sequence, and staple twice along the fold line. When
you register, you will receive two vinyl book covers, plus mounting
templates, designed for the NamePal address book.
Labels
NamePal works with continuous mailing labels in five common sizes.
You can also print labels on a laser printer using the Avery 2 5/8
inch labels that are 3 across each sheet. Use VARY SETUP on the main
menu to choose the label width. You can revise the label width at any
time, but you only need set it once to continue using the same label
size. Labels can be 1, 2, or 3 across the printer. Before purchasing
labels, try printing with the label format on plain paper. Check the
page to make sure your printer is wide enough for the label format
you select. If you see a space between address lines, the format is
"wider" than your printer.
Self-adhesive (Avery type) labels, that peel off backing sheets and
stick on envelopes, are the best ones to use for most purposes. If
you select only one name for label printing, NamePal gives you the
option of printing up to 999 copies (return address labels, etc.).
PRINTED LISTINGS 4-3
To check that continuous labels are correctly positioned in your
printer, print one label using the "Lineup" record provided with
NamePal. For laser printers, if you are printing 10 or fewer labels,
choose the "1 UP" option. Then you can re-use the label sheet by
setting a wide left margin, and choosing "1 UP" again to print in the
second column.
Custom Labels & Envelopes
The Custom format prints any size label up to 11 inches high. These
labels may be any width, but can only be one across the page. This
option is often used with large business address labels that are
preprinted with the return address. You can also use this option to
address envelopes, by varying the LEFT MARGIN so the address prints
in the proper location on the envelope.
Page Size & File Cards
Choose the PAGE SIZE option to print reports on 8 1/2 by 11 inch
paper. If you use a TITLE, the date and page number will also print.
Use FILE CARDS to print Rolodex cards or standard 3x5 cards. This
option will print either 2 1/6 by 4, or 3 by 5 inch sizes. Use the
special "continuous" type computer forms for printing FILE CARDS.
Setup (Compress, etc.)
You can use SETUP to send "control codes" to your printer for
compressed, enhanced, and other special print styles. Use this
technique to print smaller address books, and for other special
effects. These "control codes" must first be added on Notecard
records. Use the regular ADD function for Notecards. Put just the
"control code" decimal numbers on comment lines in the Notecard (for
example, 15 27 48). Do NOT use "letter" codes. Leave at least one
space between numbers on the same line. For samples, see "Compress"
and "Normal" on the initial NamePal data. These "control code" values
are not the same for all printers, so consult your printer manual for
specific values.
To send these setup codes to the printer, first choose SETUP PRINTER
(COMPRESS, ETC.) on the PRINT FORMAT menu. Then, using the standard
Record Selection techniques, select the Notecard record with the
desired "control codes."
Volume in drive A has no label
Directory of A:\
CATEGORY NP0 512 9-24-88 5:45p
COUNT NP0 128 5-24-89 12:42p
DATA NP0 2048 5-25-89 8:36a
FILES706 TXT 1777 3-09-90 7:55p
GO BAT 14 1-08-86 1:59p
GO1 BAT 39 3-09-90 1:22p
GO1 TXT 540 3-09-90 1:23p
HELP NP1 28044 5-23-89 11:16a
INDEX NP0 3584 2-13-90 4:02p
MANUAL DOC 32753 2-13-90 3:59p
NAMEPAL EXE 61146 2-13-90 2:34p
PRINTDOC BAT 22 2-13-90 4:08p
READ ME 1044 2-13-90 4:07p
SETUP NP0 128 7-20-89 10:13a
14 file(s) 131779 bytes
24576 bytes free