Home of the original IBM PC emulator for browsers.
[PCjs Machine "ibm5170"]
Waiting for machine "ibm5170" to load....
DANCAD3D is an excellent and versatile drawing program that lets you do
very complex things like stereoscopic 3D wire-frame drawing, or very
simple things like designing letterheads. Draw in two and three
dimensions. Separate groups of lines into "elements" that can be
saved, loaded, magnified, rotated, flipped, offset (moved), and used
over and over again. Keep them as a file on a disk (give them names
like cube, sphere, and cylinder).
DANCAD3D prints surprisingly sharp, crisp lines on Epson/IBM-compatible
dot-matrix printers. Use it for many different
applications, including the following:
~ Mechanical drawings and technical illustrations
~ Business forms of many kinds
~ Page layouts which combine text and drawings
~ Automatic computer slide shows
~ Engineering simulation to verify the fit of three-dimensional shapes
DANCAD3D also supports many plotters, PostScript laser printers, and
image setters such as the Linotronic 300. It works with a mouse, 3-D
track ball, or cursor keys.
DANCAD3D includes the DANMOVIE program, a full demonstration, and its
documentation. DANMOVIE is a very useful engineering tool. With it,
you can program DANCAD3D to make an animated close-up of parts in a
layout drawing. Use this close-up to confirm the fit of moving parts.
Produce an animated perspective view of the entire assembly with all of
the parts in motion.
[ D A N M O V I E D O C U M E N T A T I O N ]
DANMOVIE.COM v1.10 (512k to 640k)
For Use With DANCAD3D.COM v1.33-512k or v1.30-640k.
Daniel H. Hudgins, 466 Diamond St., San Francisco, CA 94114.
SYSTEM REQUIREMENTS:
* Color Graphics Adapter Video Board (CGA) 100% compatible.
Note: DANMOVIE v2.0 supports EGA, MGC and Hercules (tm)
video boards, it comes with the manual when you order it.
* 512k or more memory.
* 100% compatible PC with a disk drive.
* DANCAD3D.COM, v2.0 with 14 disks and 300+ page manual.
DANMOVIE works with DANCAD 3D to animate screens saved as pixel
bit maps. DANCAD 3D can print out or plot the drawings at very high
resolution (greater than 4 million pixels) if you like the way the
animation looks using DANMOVIE.
DANMOVIE is a useful engineering tool since you can program DANCAD
3D to make an animated close-up of parts in a layout drawing. In that
way you can confirm the fit of moving parts. You can also program
DANCAD 3D to produce a animated perspective view of the whole assembly
with all its parts in motion!
To run DANMOVIE you need to have a set of pixel frame files. You
can make these with DANCAD 3D. Read the tutorial in the file
MANUAL.DOC that comes with DANCAD 3D. The set of frame files must all
have the same PATH\FILENAME. The filename extensions must be numbered
consecutively starting with .1 (e.g.: c:\GQ\MY_FRAME.1,
c:\GQ\MY_FRAME.2, c:\GQ\MY_FRAME.3, c:\GQ\MY_FRAME.4, ...
c:\GQ\MY_FRAME.24). DANMOVIE v1.0 will read up to 24 frames into
memory.
There are two ways to load the pixel frame files. One, just enter
X:\DANMOVIE at the DOS prompt (where X:\ is the path to DANMOVIE.COM).
And the enter the path\filename (don't enter the .EXT (e.g.: B:FRAME
not B:FRAME.1)) when prompted for it. Two, enter X:\DANMOVIE
X:\FRAMES (where X:\FRAMES is the path\filename for the set of pixel
frame files) at the DOS prompt.
After the frames are loaded you can run them forward (press [F]),
reverse (press [R]), back n' forth (press [B]), change the speed
(press [D] or [S]), and pause the action at any point (press [P]).
There is a pop-up help screen you can get by pressing [H] (for help or
^[^] or [Return]). To exit to DOS press ^C or ^Q (^C means press
the [Ctrl] key at the same time you press the [C] key).
Version 1.10 of DANMOVIE has less flicker when run fast. Version
2.x supports 34 CGA color frames, and Hercules (tm) Hercules or EGA
(tm) IBM high resolution frames. DANCAD3D and DANCAD87 require a
harddisk to run properly.
If you find this program useful (or just fun) write me and say so.
If you can think of any changes you would like to see in a up-date of
any of my programs send me a letter.
[1]
Daniel H. Hudgins, 466 Diamond St., San Francisco, CA 94114
Read the notice on the DANCAD3D.COM
disk before using this disk.
Directory of DANMOVIE DEMO v1.10E
24 Files
FRAME 1 DANCAD 3D pixel frame file.
FRAME 2 "
FRAME 3 "
FRAME 4 "
FRAME 5 "
FRAME 6 "
FRAME 7 "
FRAME 8 "
FRAME 9 "
FRAME 10 "
FRAME 11 "
FRAME 12 "
FRAME 13 "
FRAME 14 "
FRAME 15 "
FRAME 16 "
FRAME 17 "
FRAME 18 "
FRAME 19 "
FRAME 20 "
DANMOVIE COM Program that shows the frame files.
DANMOVIE DOC Documentation for DANMOVIE.COM
GO BAT Runs demo.
FILES DOC This file.
Volume in drive A has no label
Directory of A:\
DANMOVIE COM 27002 8-31-88 9:20a
DANMOVIE DOC 3258 8-31-88 9:30a
FILES DOC 1318 8-31-88 9:26a
FRAME 1 16384 4-18-87 8:29p
FRAME 10 16384 4-18-87 8:39p
FRAME 11 16384 4-18-87 8:40p
FRAME 12 16384 4-18-87 8:42p
FRAME 13 16384 4-18-87 8:43p
FRAME 14 16384 4-18-87 8:44p
FRAME 15 16384 4-18-87 8:45p
FRAME 16 16384 4-18-87 8:46p
FRAME 17 16384 4-18-87 8:47p
FRAME 18 16384 4-18-87 8:48p
FRAME 19 16384 4-18-87 8:49p
FRAME 2 16384 4-18-87 8:30p
FRAME 20 16384 4-18-87 8:50p
FRAME 3 16384 4-18-87 8:32p
FRAME 4 16384 4-18-87 8:33p
FRAME 5 16384 4-18-87 8:34p
FRAME 6 16384 4-18-87 8:35p
FRAME 7 16384 4-18-87 8:36p
FRAME 8 16384 4-18-87 8:37p
FRAME 9 16384 4-18-87 8:38p
GO BAT 35 8-31-88 9:32a
24 file(s) 359293 bytes
0 bytes free